JOYO PXL 4 Effect Pedal Loop Controller Black

"Sometimes a song can require quite a complicated patch, this can mean something close to tap dancing on your pedals if you're not careful!  So that's where these pedal switches come in handy. Pre program your patches for ease of use for that crucial live situation when timing is everything!"

JOYO PXL 4 Effect Pedal Loop Controller Black

"Sometimes a song can require quite a complicated patch, this can mean something close to tap dancing on your pedals if you're not careful!  So that's where these pedal switches come in handy. Pre program your patches for ease of use for that crucial live situation when timing is everything!"

The JOYO PXL 4 is a fully programmable guitar effect pedal switcher. The PXL series from JOYO allow the gigging musician or session guitarist complete flexibility over the guitar effect pedal chain. Its a programmable 4 loop pedal router. The inability to switch banks of pedals ON or off at the same time. The PXL4 allows you to create preset banks of tones, and then seamlessly switch your desired pedals on or off together. Available in 4 pedal. This is a programmable and storable effects looper. Your programmed pedal groups will be stored even after the power is shut down, so no constant re-assigning your favourite groups and settings.

With the maximum storage of 8 groups tone, the design of TRUE Bypass of the PXL4 guarantees the smooth transfer of signal and it avoids the effect interference caused by other electronic switches. The PXL has super fast switch speed and an excellent low switch noise.

• Available in black colour.
• DC 9V power supply Input Jack
• Main Output jack
• Instrument Input jack
• Store Button
• Edit Button
• Bank Display
• Group A on/off Switch
• Group B on/off Switch
• Bank down Switch
• Bank up Switch
• Group Status Indicator
• Effects Status Indicator

It is very simple to use the PXL series FX Pedal grouping system. Just connect your effect pedals to the Loops 1-4 on the PXL 4. Connect your guitar to the PXL's Input jack. Connect the PXL from the output to your amplifier`s INPUT. Connect the PXL power supply and also power on all your effects pedals,turn on all the FX pedals connected in the PXL's FX LOOP. Power your Guitar amplifier on. You are now ready to program the PXL 4.

As an example you could activate your Overdrive and your delay effect pedal on program 1; Your overdrive, tremolo & delay on program 2, your overdrive tremolo flanger & delay on program 3, flanger alone on 4. etc..

so whatever pedals you have you can activate with one click, rather than several tap dancing moves and getting those important effect changes when you want them.

Dimensions :28.3(L) x8.2(W) x5.5(H) cm
Weight : 0.99Kg
colour:black

Package Include:
1 x JOYO PXL-4 Guitar Programmable Effect Pedal